AMCS technologies on a construction site in Abu Dhabi

AMCS technologies DCS 60 anti collision and zoning system equips twenty tower cranes participating in the Las Island project in Abu Dhabi, UAE. Among the twenty machines, there are sixteen Potain MCT205, two MC175 and two Raimondi MRT294.

The DCS 60 operates in real time and in 3-dimensions to calculate the distances between each crane component as well as movement speed. It enables action to be taken on equipped mechanism to ensure complete immobilization of the crane at a pre-set distance from a particular obstacle.

Developed in two phases, the project comprises the Yas Arena, a new place of 18 000 seats dedicated to concerts and sport events as well as more than 50 cafés and restaurants, 20 shops, a cinema, a beach club, and two hotels. The project also includes the Water’s Edge, a large residential project.

Construction work started in December 2017, and one part of the project should be expected at the end of 2019.

The French AMCS technologies and Acreos embark on a technical partnership

AMCS Technologies, specialised in safety products for lifting machines, and the company Acreos which designs and manufacturers simulators for machine training decided to combine their technical expertise in a partnership. Thus, Acreos is in charge of the development of a crane simulator for AMCS, the SIM 61. This device will create a fully configurable virtual 3D site. Once the environment is created, it is installed on a computer connected via wired connection to the AMCS anti-collision devices DCS 60 or DCS 61-S and will simulate the different sensors fixed on a real crane. The data collected by these sensors are simulated by the SIM 61 which sends the information like a real crane to the system. From the R&D offices of AMCS technologies, the systems react in the same way as on a real job site and the simulation of anti-collision between cranes in interference can be tested.

Acreos uses the know-how of AMCS technologies to improve the training of apprentice crane operators in real conditions. The simulator will use the DCS 61-S systems installed on the cranes to collect data in real time thank to its data logger function, the position data of the machine during the exercises. The trainer can then analyze them and debrief with the student on his performances.

The DCS 60 in charge of anti-collision at a power plant in Stockholm

AMCS technologies installed its DCS 60 anti-collision and zoning system on a new model of Comansa crane, the 21LC1050 with a maximum load capacity of 50 tonnes. The tower crane is currently working at Högdalens värmeverk, an existing Combined Heat and Power plant located south of Stockholm and it will help to replace one of the boiler of the plant for newer technology. In addition to mobile cranes, a Liebherr 280 EC-H crane with 35m of jib and 56m hook height will assist the Comansa crane with 65m of jib and 73.3 m hook height.

AMCS Technologies DCS 60 Anti-collision system on the jobsite of the new Vinci headquarters

The DCS 60 anti-collision and zoning system designed by AMCS Technologies was chosen to equip 11 Liebherr and Potain flat-top cranes on the site of the new Vinci headquarters in Nanterre (France). The DCS 60 manages the interferences between the many cranes and acts on their mechanisms to slow them down an to ensure their complete immobilization when there is a risk of collision between two cranes. The SUP 61 supervision tool has also been installed in the offices to monitor the site’s activity in real time. Connected via radio link to the network of the DCS 60 systems, the SUP 61 can display on a single screen the different movements and information of all cranes. It can intervene remotely on the neutralization function of the system selectively but also gives the possibility to activate / deactivate prohibited zones according to hazards and movements on the site.

DCS 60 of AMCS in 59 tower cranes for the Dubai Creek Harbour

In the United Arab Emirates, the real estate company Emaar is in charge of the construction of the Dubai Creek Harbour, a future new town in Dubai. The project, actually at phase one of the project called “Island District”, gathers 59 tower cranes in which are settled on each of them AMCS technologies’ DCS 60. These famous anti-collision systems play a key role in terms of security, as everyday more than 10 000 people work on site to undertake 33 high rise buildings. “Anti-collision and zoning systems are essential for this spectacular project, managed locally by our exclusive dealer in the United Arab Emirates, A and Z technologies represented by Abdelrahman Saafin” mentioned Radoine Bouajaj, AMCS technologies Sales Director.