The heavy lift and transport specialist Mammoet has successfully installed three modules to support a new generator and turbine at the Arcellor Mittal Dofasco steel plant in Hamilton, Ontario, Canada. To ensure proper operation, the equipment used had the capacity to move the modules and didn’t wright so much that it overloaded the foundation. Through careful analysis and a close collaboration with module’s designers, Hatch Limited, Mammoet chose the Titan Tower system as the best solution. It was able to disperse the weight of the modules so that with its own weight, it didn’t overload the foundation. All the steps of the operation were executed using SPMT, Hillman rollers and a Gantry system.
The Titan Tower system is made up of huge steel stools stacked and fastened together to reach a certain height requirement. Towers are also reinforced with cross bracing to provide a strong platform. The titan Tower was assembled on top of a skidding system, then loaded and moved along the skid track with the modules. It crossed over an open pit area using roro ramps and was placed inside the existing plant. Moreover, the client constructed permanent steel supports underneat the modules. Finally, Mammoet teams jacked down the modules onto the supports and removed the Titan Tower system, in order to install the turbine and generator underneath.